Electric drill is a necessary tool for decoration, but one of the pain points is long-term use. The electric drill will heat up. When the temperature is too high, the internal coil or components of the electric drill will be burnt, making the electric drill unusable. The temperature control switch can solve the problem of electric drill overheating.
The installation method is to directly connect the temperature control switch in series with the power cord of the electric drill. Special attention should be paid to the temperature switch and the inner motor winding of the electric drill, which can better sense the temperature and control the temperature more accurately. When the electric drill is used for too long, the internal coil starts to heat up. When the temperature is high and reaches the set temperature of the temperature control switch, the temperature control switch works, the internal contact is disconnected, and the power supply is cut off in time, and the electric drill stops working to make the electric drill always Maintain a safe working condition. When the temperature of the coil drops to a safe temperature, the temperature control switch can sense the temperature again, return to the normal working state, and the electric drill restarts to work.
In addition to long-term use, electric drills will generate heat. If gears and bearings are not properly lubricated, they will also overheat. Although the temperature control switch can control the temperature in time during normal use, it must be maintained daily. You cannot rely on the temperature