S01 Button type is snap action and bimetallic thermostat, Bimetal trips off or on quickly to open or close the circuit when temperature reaches the prescribed value.
Special Features |
* Small size and easy for mounting;
* Low current sensitivity, no large temperature difference due to over current;
* Precise temperature control.
Electrical Specifications |
250V AC : 3A
125V AC : 6A
24V DC: 6A
Contact Resistance: <30mΩ
Dielectric Strength: 2KV
Temperature Range And Tolerance |
Operating Temperature | 50~220℃, A specification for each 5℃ |
Operating Temperature Tolerance | ±5℃ |
Reset Temperature | Less than 1/3 of operating temperature |
Reset Temperature Tolerance | ±15℃ |
Application |
Transformer
Coil
Curtain Motor
Washing Machine Motor
Certification |
CQC:17002172427
UL&CUL:E309992
TUV:R 50383352 0001
VDE:40048046
Dimensional Drawing |
Series Application |
FAQ |
1. How should I select the correct action temperature of thermostat?
The action temperature selection of a thermostat should be based on the application:
Measure the temperature of the position where the thermostat would be mounted;
Setting the temperature range of application;
Select the temperature of a thermostat. The current flowing through thermostat need to be considered when selecting this temperature. If this thermostat is used for heat protection, the action value should be above the normal working temperature, but lower than the temperature limit of other components to be damaged.
2. What’s the difference between Normally Closed thermal switch and normally open thermal switch?
Normally closed thermal switch means that the contacts of thermal switch normally remain closed. When temperature increases to the set value, the contacts would open and cut the circuit OFF.
Normally open thermal switch means that the contacts of thermal switch normally remain open. When temperature rises, the contacts would close and connect the circuit ON.
We now have several models that both Normally Open and Normally Close type are optional, like 17AME, TS01, KW, KSD301, 3MPE, and so on.
3. What’s the difference between creep action thermostat and snap action thermostat?
According to the action type of contacts, the bimetal thermostat can be divided into creep action and snap action thermostat. General speaking, creep action thermostat can only be used for heating pad or cushion. Our WAA2 series thermostat belongs to creep action type.The function of creep action thermostat is for temperature adjustment, not for heating or over temperature protection. Only USA and Canada accept this kind of temperature controlling device. In Europe,creep action thermostat is not allowed to use. On the contrary, most of bimetal thermostats are snap action. The main purpose is over heat protection. Our KW model is snap action.
Contact Information
Company Name: Yangzhou Wuyue Electric Co.,Ltd
Address:Building D, Software Information Industrial Park, No.2 Huaijiang Avenue, Baoying County, Jiangsu Province, China
Contact: Lorena Qiao
Mobile: +86 153 6641 6606 / 189 2191 2633
Tel: +86 514 88986588
Fax:+86 514 8898 6599
http://https://wuyuecn.en.alibaba.com
Email: sales01@wuyuetech.com
CATEGORIES
CONTACT US
Building D, Software information Industrial Park, No. 2 Huaijiang Avenue, Baoying County, Yangzhou City, Jiangsu Province, China
NEWSLETTER