PRODUCT CATEGORIES

Special Features

* Small size, Long life and high reliability;

* High level bimetal ensures that it can withstand the current of normal circuit;

* The combination of bimetal and heater can action snappily;

* Accurate trip off time can prevent motor from overheating;

* Both temperature and current sensitive;

* Each part ROHS environmental standards are strictly enforced;

* Terminals are optional and customized;

* Wires are optional and customized;

* Sealed sleeving can make the protector varnishing proof.

 

Electrical Specifications

45A / 12V DC

25A / 24V DC

18A / 250V AC

28A / 125V AC

 

Technical Parameters

Operating Temperature Range	50℃~180℃
Workable Tripping Off Current Range	2~45A
Temperature Tolerance	±5℃，±7℃
R/T 25℃current Testing Standards	4~10S (Or Customized)

Application

Window Motor

Wiper Motor

Car Seat Motor

Skylight Motor

Soybean Milk Machine

Juice Machine

Food Processer

Noodle Machine

Washing Machine

Dust Collector

Garden Equipment

Certification:

VDE:40035126

 

Dimensional Drawings

FAQ

Q: What parameters should we provide for the price and samples request of thermal protector 6APE?

A：Since 6APE series are current sensitive thermal protector, also called mini circuit breaker, the following information would be necessary.

Thermal Protector Model 6APE series
Parameters	Value	For Example
Voltage		24VDC or 230VAC
Working Current		10A or 8A
Tripping Off Current		30A or 25A
Tripping Off Time		4-10 seconds
Application		Wiper motor, Juicer motor etc
Action Type		Normally Closed or Normally Open
Temperature Rating		120 ℃
Insulation Sleeving		Yes or No
Lead Wire		Specifed wire type and length, like UL3321,19AWG,65mm long
Order Quantity		100K pcs

Q: What is the payment term of thermal switch?

A: Our acceptable payment terms of thermal switch are:

1. 100% T T with order (It is suitable for total amount less than USD20,000)

2. L/C at sight ( We would request 30% T/T with order and the balance 70% to be L/C at sight. The issuing bank of LC should be agreeed by us and total amount of thermal switch order should be more than USD20,000)

3. For the small amount, for examples less than USD5000, we may request 100% T/T to our personal account to avoid customs clearance.

4. For the sample fee, if the customer can pay the delivery cost, we will provide 5 samples for free. If the customer can not pay the delivery cost, USD100 will be charged for both sample and delivery cost.

 

Q: What is the leadtime of thermal switch?

A: Our common leadtime for bimetal thermal switch is 20 days upon receipt of advance. If we have inventory, the leadtime could be 7 days.

For new products ,the leadtime would be 25 to 30 days.

Sometimes rush orders are also acceptable, but the lead time should be agreed by both sides before order release.

 

Q: What qaulity assurance system do you use in your factory to ensure the thermal switch quality?

A: 1. To ensure the quality consistence of our bimetal thermal switch, we got ISO9001:2008 version certification and fulfill the system strictly. In 2012, we started to implement TS16949 system to meet the demands of automotive cusotmers.

2. The life endurance we guaranteed is based on the working enviroment and rating. Different thermal switch has different level, like 10,000 cycles, 30,000 cycles or 100,000 cycles.

3. The defective rate of our thermal switch that we promise to our customer is 100 ppm.

 

Q: How should I select the correct action temperature of thermostat?

A: The action temperature selection of a thermostat should be based on the application:

Measure the temperature of the position where the thermostat would be mounted;

Setting the temperature range of application;

Select the temperature of a thermostat. The current flowing through thermostat need to be considered when selecting this temperature. If this thermostat is used for heat protection, the action value should be above the normal working temperature, but lower than the temperature limit of other components to be damaged.

 

Q: What are the special notes for mounting thermal cutout?

A: 1. The temperature sensing surface of thermal cutout has to contact the heat source directly and tightly;

2. The contact surface must be flat and with good temperature conductivity. The fixing belt or fastener has to be reliable and no sharp edges, to avoid damaging the insulation of thermal cut out.

3. If surface of thermal cutout is electricity conductive, the insulation sleeving should contact the thermal cutout body as tightly as possible, to reach the best heat sensitivity.

Contact Information

Company Name: Yangzhou Wuyue Electric Co.,Ltd

Address:Building D, Software Information Industrial Park, No.2 Huaijiang Avenue, Baoying County, Jiangsu Province, China

Contact: Lorena Qiao

Mobile: +86 153 6641 6606 / 189 2191 2633

Tel: +86 514 88986588

Fax:+86 514 8898 6599

Web: http://www.wuyuetech.com

     http://https://wuyuecn.en.alibaba.com

Email: sales01@wuyuetech.com